Assuming you don’t have access to a garage or professional car detailing services, doing it at home can be your only option.
You have a few pieces of equipment and a supply store nearby. What else will you need for your DIY car wash valet? Yes, the steps and procedures.
Here are some helpful tips on how to do car detailing at home. Read on!
Preparation for Car Detailing
Before doing the actual cleaning job, prepare and set everything you will need for the job. Collect and organize your cleaning chemicals, tools, and equipment. Here are the most common:
- Microfiber cloths
- Vacuum machine
- Wax products and applicators
- Cleaning products
- Water bucket and power washer
Ensure also a steady water supply. It will be the most important car wash resource.
Washing the Exterior
Choose a shaded area to park for. It is not good to detail under intense sunlight. Begin pre-rinsing the car to remove grime and hard dirt using a power washer. Apply snow foam all over the vehicle afterward, then rinse again thoroughly.
Then, prepare a bucket filled with wheel cleaning solution. Using a wheel detailing brush, apply the cleaning solution to the rims and into the inside barrels of the wheel. Once dirt becomes loose into the solution, use the power washer again to rinse your wheels. Allow it to dry.
Spray an all-purpose cleaner on the door shuts, badges, and fuel filler area. Brush them with a soft bristle detailing brush, then rinse well.
Using a wash mitt, apply car shampoo and begin full-washing the vehicle from top to bottom. Soap each panel with consistent side-to-side motions. Then rinse again thoroughly with a flush of clean water.
Cleaning the Interiors
Start decluttering or removing items inside the car, like floor mats, seat covers, and debris. Vacuum the floor mats, then clean using all-purpose cleaners or degreasers.
Aided by a leather brush, vacuum clean all the seats, floorings, dashboard, and headliners. Brush away dust on vent areas, upholstery seams, and steering wheel.
Apply cleaning products for the interiors with a microfiber cloth. You can also use a upholstery car seat cleaner for the seats, covers, and other leather surfaces. Let an all-purpose cleaner do the word for dashboard surfaces, steering, and trims.
Apply a UV protective coat on every surface after cleaning. This will act as both conditioner and shield from extreme sunlight. Finally, deodorize all cloth and air conditioning vents to enhance the interior.
Applying Wax and Sealant
Apply a small sealant on the applicator and swab over the paintwork in a side-to-side motion. After drying, buff with a microfiber cloth for an even shine.
Spray clean the windows with glass cleaner and a dedicated cloth. You may use a damp cloth or a microfiber. Wipe thoroughly and buff for a clear finish.
Coat surfaces with wax in a circular motion using an applicator. Do it one panel at a time to cover the whole car. Leave the resin to cure for a time specified. Then, buff the haze with a microfiber cloth.
Try Car Detailing at Home Today
Now you are ready to detail a vehicle, make your car look new again. Let these practical steps on how to do car detailing at home help you well.
So, what are you waiting for? Get started today!
Keep scrolling to discover more great tips and advice on this blog.
Leave a Reply